Home
    About Us
    Products
    Enquiry
    Contact Us
 
Products > Chemistry

Balance


KCHEM101
 

Balance, Physical

Technical Data
Beam : Finest light brass beam
Knife-edges and planes : made of finest agate
Arrestment : to beam and suspensions highly polished metal pillar fitted with six point Arrestment and extended support and single block guide.
Case : Wodden polished case with divided doors.
Maximum Capacity : 250 Gms
Sensitivity : 1mg
 


KCHEM102

Balance, Analytical

Rapid weighing short triangular beam suitable for research Laboratories for precision work.
Technical Data :
Beam : Triangular short beam gun metal alloy. The rider scale fitted infront of the beam is provided with 100 notches with zero at the centre.
Knife edges and Planes : Made of finest agate.
Arrestment : Vertical raising type.
Stand : All parts of bras
Pans : Chromium plates, slightly concave inwards dia 7.5 cm.
Case : Teak-wood polished case with front slider and two side doors.
Base : Sunmica black board.
Maximum Capacity : 200 gms
Sensitivity : 1/10 mg



KCHEM103

Balance, Analytical - Digital

Capacity: 62 to 210g
Readability: 0.1mg to 1mg


KCHEM104

Chemical Balance

Technical Data :
Beam : Short beam of hard brass. The upper edge divided into 50 scales divisions to each side. Each scale division representing 1/5 mg. Rider on the scale.
Stand : All parts of brass.
Arrestment : Vertical raising type.
Pans : Chromium plated, slightly concave inwards.
Case : Wooden polished case, with front slider and two side doors.
Base : Sunmica black board.
Capacity : 200gms
Sensitivity : 1/5 mg



KCHEM106

Balance, Triple Beam

A single pan, low from beam that will weigh upto 2610 gm when used with supplementry mases. the balance has three notched weighing beams with center indicating sliding masses, giving total weighing capacity of 610gm. Additional masses are hung on the end of the beam increasing the capacity by upto 2610gm. and they can be stored in the recessed base when not required with magnetic damping for quick weighing.
Equipped with facility for under balance weighing.
Beams : 0-500 g x 100g; 0-100g x 10g; 0-10g x 0.1g
Supplimentry masses 2 x 1000 gm & 1 x 500gm
Pan, stainless steel, diameter 150mm
 



KCHEM107

Balance Four Beam

A High Form Balance With Four Beams,Each Provided With A Non-Removable Sliding Mass, Has Total Weighing Capacity Of 311 Gm .No Additional Mass Is Required,Provided With Spring Loaded Zero Compensator And Magnetic Damping.Pan Of 90 Mm With Two Pouring Spouts & Handle .Height To Stirrup Approx 180mm ,A Platform Housed In The Base Can Be Used For Density Determination.
Beams:- 0-200 Gm X 100 Gm
.............0-100 Gm X 10 Gm
.............0- 10 Gm X 1 Gm
.............0- 1 Gm X 0.01 Gm
 


KCHEM108

Balance Dial-O-Matic

A High Form Balance With Two Beams One Dial And One Vernier Scale
Beams :- 0-200 Gm X 100 Gm
.............0-100 Gm X 10gm
Dial : 0-10 Gm Vernier Scale Reads To 0.01gm.


KCHEM109 

Balance Mass set, Physical

Precision of chrome plated in1-2-5 series. Minor fractionals are of aluminium and major fractionals are of Brass, 10mg rider is nickelled, complete box to protect them from loss. Set is in polished wooden box.
Type A B C D
Set of 1 g to 100 100g 200g 500g 1000g
 



KCHEM110

Lever Balance, Dual Scale

The balance frame is of aluminium casting having three point base with a levelling screws.
The dual range are scale 0-250 gms x 1gm division and 0-1 Kg x 10gms. With removable pan.
The changeover is effected by a swing over mass on the pointer arm.
A hook is provided below the pan for relative density and upthrust determinations.
Overall dimentions : 250x320 mm width x height
 



KCHEM112

Platform Balance

Specifications:
Capacity 2010g
Sensitivity 0.1g
Graduations 0-10g, 0.1g increment (upper beam
0-200g, 10g increment (lower beam)
Tare capacity 200g (Optional) Pan Diameter 150mm (stainless steel)

 


Home | About Us | Enquiry | Contact Us
Microscopes | Glassware | Physics | Chemistry | Biology
Copyright 2005 kslabindia.com. All right reserved.